Your basket is currently empty
Mix very well before use, using a drill/paddle tool, applying thin layer to surface. Heavy coating will result in longer drying times.
Please follow preparation and application process below:
Step1:
Surface and product preparation:
Clean and pre-seal surface
Once surface is cleaned, prepared and dry, PaintMax Pre seal should be applied to the surface via roller,brush or spray. Allow a minimum of one thin coat to the surface, no more then 2 coats of pre seal is required. Allow product to fully dry between coats and before coloured top coat is applied.
Dusty Unstable/Virgin Surfaces:
For areas that are dusty and unstable, you will need a product that has been designed for maximum penetration while providing a good film build by re-bonding the substrate together, returning the floor to a solid sound surface the product we advise is PaintMax Pre Seal, this can be purchased directly from PaintMax
Oily / Contaminated Surfaces:
Where the floors have been subjected to oil and grease, We recommend steam cleaning your floors and use our Heavy Duty Surface Deep Clean products. Before application of any floor coating be sure to allow the surface to dry fully and PaintMax Pre Seal has been used. Any contamination that remains on the surface will effect the final finish of the polyurethane coating.This may result in coating not bonding to the surface effecting longevity.
Rising Damp:
A floor coating does not do well if you have any moisture issues. Hydrostatic pressure from the moisture can actually cause the coating to peel up, sometimes taking pieces of the concrete with it. Should floors be devoid of an effective Damp Proof Membrane (DPM), virtually any paint will lift and peel off the surface. Indeed, even self-levelling screeds can be pushed up by water pressure. This is another nightmare regularly experienced by many companies. For this reason, a damp proof coating is recommended as a solution before applying a floor paint.
Treating your floor before coating them:
It is important to prep your surfaces before coating them to assist in application and prevent issues post-paint. We would advise that surface is steam cleaned or jet washed where possible. Allowing surface to fully dry. Be sure surface is sweep and free of any dust and surface contamination.
Repair your floor:
Before painting your surface it is important to repair any cracks,holes or expansions of joints in your concrete to prevent an un-slightly finish to your flooring once it’s painted.
PaintMax Pre Seal is designed to seal the surface from the out-gassing of the concrete, where air will rise and be expelled from the concrete which is often caused by a rise in temperature or a change in humidity. Another major cause to poor flooring is rising damp. Due to a poor or non-existent DPM (Damp Proof Membrane), the damp is caused by a rising water table and/or the immediate surrounding areas being waterlogged.
Air entrapment is a common issue that can occur if the surface isn’t primed before being coated. This is where the air pushes bubbles into the resin coat which later bursts, leaving ‘craters’ and ‘pin holes’ in your floor paint. This can also be caused when the resin has been mixed too quickly – it is important to use the correct tools to mix to avoid issues. Primer tackles this issue by soaking further into the surface to fully seal the entire surface area of concrete floors. Air is then less likely to push up, and on the rare occasion that it does, the bubble will pop and the resin now being thinner, will generally revert back and refill the ‘pin hole’ caused by the bubble.
Product & Application information:
Product should be fully stirred with a power paddle before application,
You can apply quick and simply with any standard roller and brush,
Product can also be applied with industrial sprayer (product may need to be thinned with industrial thinners max 5%, compatible thinners available from PaintMax )
coverage:6/8m squared per litre, Depending on surface age and conditions
Two Coats Always Advised, keep coats light, heavy application will result in longer dry times.
Dry time of coating using standard roller in areas with minimal air moisture (lab conditions) drying time will be extended if coat is applied too heavy, for best results apply thin layers.
touch dry @ 15'c = 10/12 hours
first coat should be left to dry for 24 hours to assure adhesion to surface leave minimum of 24 hours for after coats always leaving minimum of 48 hours before 100% use of area again
true 100% cure will only be 7 days after application of last coating
(work in a well ventilated area using no forms of naked light/fire)
A Test area should always be preformed on surface before complete coverage.
We advise that you test a small area of the surface to check that the product firstly bonds to the surface, No reactions occurs due to contamination or reactions to previous coatings and Colour is correct.
(please note colour variation can occur between batches, batch number can be found on the lid of each tub)
Please test for damp before coating by applying a small test patch or applying a clear plastic sheet (30cmx30cm) and sealing it to the floor with a high grade tape (duck tape) with out any ways of air escaping and leave for 24 hours if there is any forms of water vapor on the sheet the are will have damp and steps will need to be taken before coatings
Mix very well before use, using a drill/paddle tool, applying thin layer to surface.
Heavy coating will result in longer drying times.
If the area you are looking to coat is virgin (never been coated) or has had contamination from oil,grease,cutting agents etc,Cleaning with correct equipment/surface preparation products will be required.
The area will then need to be coated with a heavy duty pre seal and left to dry for 24 hours (you can purchase this pre seal from PaintMax)
Power-floated/Screed areas (smooth shinny concrete) will need to be treated with a acid etch or abrade by mechanical means.
A test patch is always advised as some areas my still have contamination and this could have complications when coating.
Product weight per 20L 23kg Approx.
20L area coverage: 60 to 80 sqm
Shipping Information:
IMPORTANT
To ensure delivery efficiency a contact number is required at time purchase
The delivery company will only try twice to deliver the goods(leaving a calling card to rearrange delivery both times)
if no one is at the address or do not contact them the item we be returned to us
A refund will be made deducting a £9.99 return fee for non delivery (standard fee) Scotland may be more all vans have tracking info for proof of delivery attempt. A signature is required on delivery unless instructed.
Next day delivery is not guaranteed.
Order for under 8 units
(8 X variations of product size) will be dispatched via our courier partner APC Couriers.
A text message and email with be sent with real time tracking information from APC so that you can track delivery. An estimated time of delivery will be given on day on delivery. Please note that once the ordered items have dispatched we are no longer able to change or ament order. Any delay incurred with delivery will not be cause for cancellation or refund. Next day delivery service is not guaranteed. Orders placed for over 8 units (8 X variations of product size) will be dispatched via pallet service and will incur excess delivery charge. Please note that multiple orders placed for under the 8 unit quantity to same address may be dispatched from different batches unless we are contacted at time of order to request same batch dispatch.
If the items arrive damaged please do not accept the items from carrier, Please immediately contact our sales team via email (sales@paintmax.co.uk) We will arrange for replacement to be dispatched at the earliest shipping date. Please note that once item is accepted on delivery that no claim can be made for any damage to the item or packaging.
RETURNING PRODUCTS.
We do accept returns. Product can be return for refund provided proof of purchase can be made direct from PaintMaxCoatings Website. For returns for order placed via e commerce platforms or third party sellers we request that returns are arrange with seller.
Product refund will be made for purchases up to 28 days after purchase date.
Product would be required to be returned to our dispatch hub within 28days from the purchase date. All product will be inspected on delivery, any items that have been opened and the security tag missing would be subjected to further inspection for part refund, refund amount will be assessed on quantity of product returned per unit, if more the 5% of product has been used then 50% of purchase price will be refunded. Initial dispatch for postage will be deducted from total refund amount charged at £9.80 per unit for standard next working day service, if order was dispatched on Saturday or pre 10:00 service refund amount will be deducted inline with initial postage charge per unit. If order was initially dispatched via Pallet (over 8 units) a charge rate per pallet will be deducted at £79.99 for pallet collection.
For product that we collect for return an additional collection postage charge will be deducted from total refund amount of £12.40 per item or if over 8 units a pallet rate if £79.99.
Refund amount will be issued at individual unit sale rate plus 5% handling fee to be deducted from total amount. Product that is collected or return or haulage that is arranged by buyer will not incur any haulage/posted costs being discounted from refund total amount but will be subject to 5% handling refund fee from total amount. Refund will only be issued on return of product to us and after inspection. Refund time can take up to 4 days after receipt and inspection of goods back to us.
Other Important information:
Shade variation can happen when orders are made at different times due to variations in batch production. Please make sure enough product is ordered at time of purchase.
Please keep a note of batch code from lid of the Tub (usually a five digit number)
This will help in referencing products production information.
If further product is required please contact before purchasing to arrange batch colour match.
PRE-SEAL ITEM IS A UNDERCOAT/SURFACE SEAL AND SHOULD ALWAYS BE OVER COATED WITH A FLOOR PAINT PRODUCT THE PRE-SEAL PRODUCT ON ITS OWN WILL NOT ACT AS A STABLE FLOOR COATING
PU Floor-paint Products are polyurethane heavy duty high impact formulation and care should be taken when applying, full safety data sheet can be requested.
All images are for illustration purposes only including main images, shade difference may happen from image to product.
Any further information can be requested via email : sales@paintmax.co.uk
Seller reserves right to cancel any purchase/payment and offer refund in full at any time.
All products are supplied and provided on the condition that we cannot be held responsible in the event they are used for any other purpose than that specified by the manufacturer, PaintMax shall not be liable to the customer in the event of damage to goods/property, injury to persons resulting from negligent or improper use/application or handling/advice of goods by the customer or their employees
Any recommendations and advice offered are given without legal responsibility. PaintMax shall not be liable to the customer in the event of damage to goods/property or injury to persons resulting from negligent or improper use/application or handling/or advice of goods by the customer, their employees or their agents or members of the general public, or any loss of profit or contracts or other consequential losses of any kind however caused.
To the extent permitted by applicable law, PaintMax disclaims all warranties, express or implied, as to the accuracy of the information contained in any of the materials on this website.
PaintMax shall not be liable to any person for any loss or damage which may arise from advice given or from the use of any of the information contained in any of the materials offered on this website. PaintMax will attempt to assist with any issues the customer experiences with any of our names products, a representative inspection by paintMax can be arranged at full cost to the customer, initial pre paid fee of £75 plus including all travel and time expenses incurred. This is only available in England and when a representative is available.
PaintMax © All rights reserved